We take all glass doors to a glass specialist to remove and install the glass. This helps us to ensure nothing is broken and it is done by someone who specializes in that area.
Doors are prepped, sanded, primed (two coats sanded in between), and coated with a 2K Pigmented Polyurethane coating imported from Italy.
PRE-PAINTED:We do an adhesion test with existing paint. If the current paint has good adhesion and without chipping, peeling or scratching off, we prep well and then sand. If the adhesion is failing, we strip the doors, clean with denatured alcohol, sand, and go through our process.
Drawers are prepped, sanded, primed (two coats sanded in between), and coated with a 2K Pigmented Polyurethane coating imported from Italy.
PRE-PAINTED:We do an adhesion test with existing paint. If the current paint has good adhesion and without chipping, peeling or scratching off, we prep well and then sand. If the adhesion is failing, we strip the drawers, clean with denatured alcohol, sand, and go through our process.
End panels are prepped, scuff sanded, primed (two coats sanded in between), and coated with Pigmented Polyurethane (two coats).
End panels are prepped, scuff sanded, primed (two coats sanded in between), and coated with Pigmented Polyurethane (two coats).
End panels are prepped, scuff sanded, primed (two coats sanded in between), and coated with Pigmented Polyurethane (two coats).
Shelves are prepped, scuff sanded, primed (two coats sanded in between), and coated with a 2K Pigmented Polyurethane coating imported from Italy.
Crown is prepped, scuff sanded, primed (two coats sanded in between), and coated with Pigmented Polyurethane (two coats).
Toe strip is prepped, scuff sanded, primed (two coats sanded in between), and coated with Pigmented Polyurethane (two coats).
Corbels are prepped, scuff sanded, primed (two coats sanded in between), and coated with Pigmented Polyurethane (two coats).
To have things sprayed on-site, the site must be fully masked for safety and the best results. Ventilation units, plastic, zip poles, masking tape, sprayers, floor covers and ceiling protection will all be brought to the site and the area will be masked off for spraying.
Holes are filled with Bondo (two passes sanded in between), followed by glazing putty after every coat to be sure previous holes are no longer visable.
Holes are first measured with a jig, then with a tape, and then we use the hardware itself as our third measuring point to ensure accuracy before drilling.
Possible Countertops
THIS CONTRACT FOR PAINTING SERVICES is made by and between the Customer And Contractor named below.
1. Definitions. As used in this agreement, the following terms have the following meaning: “Contractor” means Inspired By U. “Customer”, “You” or “Your” all mean the owner of the property or the person who signs this contact. “Proposal” means the proposal submitted to the Customer by the Contractor which describes the painting work the Contractor agrees to perform and the estimated cost to the Customer for performing the work specified in the Proposal. “Painting Services”, “Services” or “Work” all mean the work described in the Proposal which the Contractor has agreed to perform for the Customer.
2. Services Provided By The Contractor. The Contractor hereby agrees to furnish the labor, materials and supplies necessary to perform the Painting Services described in the Proposal in accordance with the terms and conditions contained in this Contract and the Customer agrees to pay the Contractor the Contract Price for the Painting Services in accordance with the Payment Schedule set forth in Section 8. of this Contract. The Customer authorizes the Contractor to use photographs taken at the jobsite for promotion.
3. Changes In The Services. Any changes to the Services described in the Proposal must be in writing and signed by both the Customer and the Contractor. You understand and agree that if You request any changes to the Services, You may incur additional charges and that the completion of the work may be delayed beyond the anticipated completion date.
4. Client Responsibilities. Read through the "How to Prepare" document and check off the items as you complete them prior to the Contractors arrival.
5. Insurance. The Contractor will have in force general liability insurance with policy limits of not less than $1MM. The Contractor will also cause each painter performing Services to be insured under workers’ compensation policy as required by applicable law.
6. Warranty. All Painting Services performed by the Contractor under this Contract will be covered by a 2 year limited warranty.
7. Matters Beyond The Contractor’s Control. You and the Contractor agree that if the Contractor is unable to complete the Work by the Completion Date because of reasons that were not caused by the Contractor or because of events beyond the Contractor’s control (such as fire, floods, acts of God, vandalism, etc.), the Contractor will not be deemed to have breached this Contract and the time for the Contractor to complete the Work will be extended by such additional time as may be reasonably necessary for the Contractor to complete the Work.
Time For Performance. The Contractor will schedule the next available project project date for You and communicate those dates upon receipt of this contract. You understand and agree that all
dates are subject to change if you request any changes or additions to the Work.
Payment Schedule. The Customer agrees to pay the Contractor the Total Payment specified below for the Services in accordance with the following schedule:
|
KITCHEN: Deposit- 20% Due upon execution of this contract Progress (New Doors Only)- $1500.00 Due when new doors are ordered Final Payment- Due on installation day upon completion of the project INTERIOR PAINTING: Deposit- 20% Due upon execution of this contract Final Payment- Due upon completion of the project EXTERIOR PAINTING: Deposit- 30% Due upon execution of this contract Final Payment- Due upon completion of the project COUNTER TOPS: Deposit- 50% Due upon execution of this contract Final Payment- 50% Due at template |
ANY PERSON OR COMPANY SUPPLYING LABOR OR MATERIALS FOR THIS IMPROVEMENT TO YOUR PROPERTY MAY FILE A LIEN AGAINST YOUR PROPERTY IF THAT PERSON OR COMPANY IS NOT PAID FOR THE CONTRIBUTIONS. UNDER PENNSYLVANIA LAW YOU HAVE THE RIGHT TO PAY PERSONS WHO SUPPLIED LABOR OR MATERIALS FOR THIS IMPROVEMENT DIRECTLY AND DEDUCT THIS AMOUNT FROM OUR CONTRACT PRICE, OR WITHHOLD THE AMOUNTS DUE TO THEM FROM US UNTIL 120 DAYS AFTER COMPLETION OF THE IMPROVEMENT UNLESS WE GIVE YOU A LIEN WAIVER SIGNED BY PERSONS WHO SUPPLIED ANY LABOR OR MATERIALS FOR THE IMPROVEMENT AND WHO GAVE YOU TIMELY NOTICE. INVOICE PAYMENTS NOT RECEIVED WITHIN 15 DAYS WILL BE SUBJECT TO A 5% LATE FEE.
CUSTOMER SIGN ON: BY SIGNING BELOW, THE CUSTOMER ACKNOWLEDGES HAVING READ AND UNDERSTOOD THIS CONTRACT AND THAT THE CUSTOMER IS SATISFIED WITH THE TERMS AND CONDITIONS CONTAINED IN THIS CONTRACT. THIS CONTRACT DOES NOT INCLUDE ANY VERBAL OR UNWRITTEN AGREEMENTS MADE. ANY ANCILLARY EXPECTATIONS SHOULD BE PUT IN WRITING BEFORE SIGNING.
Signed on 11/2/2023